Request your instant offer now. We will send you our offer within 1 to 24 hours.
Terminal blocks
Modular terminal blocks to contact loose lead ends
We can configure custom Kelvin clamps and/or rocker arm terminals into a modular terminal block for you. This terminal block can either be integrated in a stationary test cover, or it can be shifted freely under the test cover, on the testing bench or in your customized test configuration.
Product consultant
Key-Facts
Modular clamp precision.
- two modular standard contactings of different size
- mechanically-solid and robust construction
- 4-wire contactings for Kelvin clamps
- 2-wire contactings for rocker arms
- integrated GO/ NoGO signal lights
Description
Unique flexibility.
We modularely configure single Kelvin-/ and or rocker arms to a terminal block which may either be located firmly installed in a test cover or mobile in the test cover, on the test table or your special application.
A typical application is the contacting of free lead ends, as test objects are often only equipped with lead ends wothout sockets.
SCHLEICH offers a wide range of clamping devices to contact free lead ends, for example for winding connections at stators. They can be equipped with 2- and 4-wire technology.
Kelvin clamps are used for the 4-wire measurement, which is performed, if low resistances are to be measured accurately. At this, the 4-wire measurement eliminates the contact resistances at the contact point.
Our Kelvin clamps´ special design assures high reliability, solid clamping and little wear. Less demanding contactings are realized by our versatile and flexible rocker arm clamps.
To save time, terminal blocks may also be extended with an automatic “loosen-function”. If the test result was GO, the tester releases the leads at the end of a test. “NoGO-results” have to be acknowledged by the operator first, before clamps open.
Technology
Technology at a glance.
The terminal blocks are configured from basic elements according to the application.
Modular terminal block small
- Basic elements
- Kelvin clamps
- High-temperature Kelvin clamps
- Rocker arms clamps
- Pole sockets
- LED-modules
- Supply module
- Endpieces
Modular terminal block large
- Basic elements
- Kelvin clamps
- Rocker arms clamps
- Pole sockets
- LED-modules
- Supply module
- Endpieces
Applications
Impressions
Terminal block with 8 Kelvin clamps
- 8 x Kelvin clamps
- integrated signal lights on the left and right side
- Any modular design possible
Terminal block with 11 rocker arms
- 11 x rocker arm clamps
- integrated signal lights on the left and right side
- Any modular design possible
- Including pole clamps
Terminal block as customized solution
- 6 x Kelvin clamps in special design
- 4 x rocker arm clamps
Modular terminal block in a test cover with prisma
- 8 x small Kelvin clamps
- LED-signal lights (red-green) on both ends
Special construction 8 x Kelvin contacting
- Including central button to release all clamps at the same time
Accessories
Pneumatic clamps
Automatic pneumatic quick clamping- automatic clamp with pneumatic cylinder
- push-button for fast release
- for different wire diameters
- hole diameter with 4, 6 or 9 mm
Special contactings
Customized solutions based on the modular SCHLEICH building kit- individual solutions
- for perfect 4-wire measurement
- float-mounted collets
Downloads
International PDFs
German PDFs
For further information please do not hesitate to contact our technical sales under:
- +49 2372 901 25 40
- Email request
print preview
SCHLEICH is a leading manufacturer of electrical safety, functional, winding and electric motor testing technology.
SCHLEICH is a world-renowned company that focuses on the development of innovative products in the field of testing technology for electrical products of all kinds.
From A to Z - everywhere SCHLEICH testing technology is in use worldwide. Our customers come from over 50 countries and regions. Everything is developed and produced in Germany.
Quality work - Made in Germany.
2022 - SCHLEICH is awarded for the fifth time as TOP100-Innovator
2016 - SCHLEICH released the first VoltageAnalyzer for measuring the real voltage directly at the winding terminals
2012 - SCHLEICH is awarded as TOP100-Innovator for the first time
2005 - SCHLEICH released the first stator tester with partial discharge test
1995 - SCHLEICH integrates touch-displays into testing devices as a world leader
1990 - SCHLEICH released the first safety and function tester with fully automatic integrated test terminal changeover
1987 - SCHLEICH released the first surge tester with PC-control under DOS and fully automatic integrated test terminal changeover
1985 - SCHLEICH released the first MotorAnalyzer
1982 - SCHLEICH focuses fully on electrical test engineering of electrical products
1952 - SCHLEICH is founded as a motor repair shop
Pioneering spirit, competence, curiosity, brand new technologies and innovations. This is what the 150-strong SCHLEICH team stands for - led by Martin & Jan-Philipp Lahrmann. Father & son. Your guarantors for long-term partnership.
