• +49 2372 901 25 40

Test Probes

For manual PE, insulation resistance and leakage current tests

A wide variety of probes are available for PE/GB-testing as well as insulation resistance tests. Probes can be selected based on features such as their size, the maximum test current during PE tests, whether a built-in start button is required or if a built-in test result light is needed.

Product consultant

You need a personal product advice?
Please use our direct contact:
+49 2372 901 25 40
Email request

Key-Facts

Sophisticated test probes for efficient measurements.

  • Solid and industry-proven
  • Exchangeable test probe tips
  • 4-wire technology up to the test tip- essential for optimum measuring results
  • with built-in signal-LEDs
  • with built-in start button
  • for a variety of PE-test currents

Variants

25 solutions for your testing task.

Please select the desired test method:

List view
Compare

Test probe small, 10-30 A, without start button, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length1.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug
Order number 40001945
add added
go to enquiry list

Test probe small, 10-30 A, without start button, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length4.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug
Order number 40001959
add added
go to enquiry list

Test probe small, 10-30 A, without start button, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length9.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug
Order number 40001982
add added
go to enquiry list

Test probe small, 10-30 A, with start button, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length1.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug
Order number 40001946
add added
go to enquiry list

Test probe small, 10-30 A, with start button, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length4.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug
Order number 40001960
add added
go to enquiry list

Test probe small, 10-30 A, with start button, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length9.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug
Order number 40001983
add added
go to enquiry list

GB test probe, with 2 contact pins, with start button, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length1.85 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug
Order number 40002171
add added
go to enquiry list

GB test probe, with 2 contact pins, with start button, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length5 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug
Order number 40002173
add added
go to enquiry list

GB test probe, with 2 contact pins, with start button, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length10 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug
Order number 40002176
add added
go to enquiry list

Test probe GB10 A - & insulation for norm EN60204, 10 m

for following testersGLP1-g
cable length10 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coverno
Order number 40001984
add added
go to enquiry list

Test probe GB10 A - & insulation for norm EN60204, with protective cover, 2 m

for following testersGLP1-g
cable length2 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coveryes - included in delivery
Order number 4018841
add added
go to enquiry list

Test probe GB10 A - & insulation for norm EN60204, with protective cover, 10 m

for following testersGLP1-g
cable length10 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coveryes - included in delivery
Order number 40001985
add added
go to enquiry list

GB test probe 10 A, with start button and LED, 2.5 m

for following testersGLP2-MODULAR, GLP3
overall length280 mm
handle diameter35 mm
handle length160 mm
cable length2.5 m with 19-pole plug
power resistor0.018 Ω
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the front of the tester
Order number 4003528
add added
go to enquiry list

GB test probe 30 A, with start button and LED, 2.5 m

for the following testersGLP2-MODULAR, GLP3
overall length280 mm
handle diameter35 mm
handle length160 mm
cable length2.5 m with 19-pole plug
power resistor0.009 Ω
4-wire measurementyes, up to the peak of the test probe
test current25-30 A
test peakexchangeable
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the front of the tester
Order number 4003529
add added
go to enquiry list

GB test probe 40-75 A, with start button and LED, 2 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length2 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester
Order number 4018803
add added
go to enquiry list

GB test probe 40-75 A, with start button and LED, 5 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length5 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester
Order number 4018804
add added
go to enquiry list

GB test probe 40-75 A, with start button and LED, 10 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length10 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester
Order number 4018876
add added
go to enquiry list

GB test probe 30 A, with start button, 2.5 m

for following testersGLP2-MODULAR, GLP3
overall length230 mm
handle diameter35 mm
handle length120 mm
cable length2.5 m with 19-pole plug
power resistor0,018 Ω
4-wire measurementyes, up to the peak of the test probe
test current30 A
test peakexchangeable
buttonwith start function
connection pointat the front of the tester
Order number 4000433
add added
go to enquiry list

GB test probe 40-75 A, 2 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length2 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
connection pointat the rear of the tester
Order number 4018819
add added
go to enquiry list

GB test probe 40-75 A, 5 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length5 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
connection pointat the rear of the tester
Order number 4018820
add added
go to enquiry list

GB test probe 10 A, 2.5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwithout start button
connection pointat the rear of the tester
Order number 403028
add added
go to enquiry list

GB test probe 10 A, with start button, 2.5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwith start button
connection pointat the rear of the tester
Order number 403029
add added
go to enquiry list

GB test probe 10 A, with start button and LED, 2.5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwith start button
connection pointat the rear of the tester
LEDdisplay of the result
Order number 403063
add added
go to enquiry list

Test probe for GB and insulation resistance, 10 A, 2 m

for following testersHandHeld
cable length2 m
measurement technology4-wire measurement
test current10 A
test peakexchangeable
connection pointat the rear of the tester
Order number 403015
add added
go to enquiry list

Test probe for GB and insulation resistance, 10 A, with start button, 2 m

for following testersHandHeld
cable length2 m
measurement technology4-wire measurement
test current10 A
test peakexchangeable
connection pointat the rear of the tester
start buttonincluded
Order number 403033
add added
go to enquiry list
No tester found? – No problem!

We will configure a modular solution for you – just ask us.

Description

Ergonomics. Reliability.

SCHLEICH offers a variety of test probes for PE-, and insulation resistance tests. The probes differ in size, maximum test current at the PE-test, if a start button or if a result light is integrated  in the test probe.

The test probes are completely manufactured in 4-wire-technology which assures perfect measuring results without the negative influence from the leads.

Downloads

International PDFs

German PDFs

For further information please do not hesitate to contact our technical sales under:

print preview
add added
go to enquiry list

SCHLEICH is a leading manufacturer of electrical safety, functional, winding and electric motor testing technology.

SCHLEICH is a world-renowned company that focuses on the development of innovative products in the field of testing technology for electrical products of all kinds.
From A to Z - everywhere SCHLEICH testing technology is in use worldwide. Our customers come from over 50 countries and regions. Everything is developed and produced in Germany.

Quality work - Made in Germany.

2022 - SCHLEICH is awarded for the fifth time as TOP100-Innovator
2016 - SCHLEICH released the first VoltageAnalyzer for measuring the real voltage directly at the winding terminals
2012 - SCHLEICH is awarded as TOP100-Innovator for the first time
2005 - SCHLEICH released the first stator tester with partial discharge test
1995 - SCHLEICH integrates touch-displays into testing devices as a world leader
1990 - SCHLEICH released the first safety and function tester with fully automatic integrated test terminal changeover
1987 - SCHLEICH released the first surge tester with PC-control under DOS and fully automatic integrated test terminal changeover
1985 - SCHLEICH released the first MotorAnalyzer
1982 - SCHLEICH focuses fully on electrical test engineering of electrical products
1952 - SCHLEICH is founded as a motor repair shop

Pioneering spirit, competence, curiosity, brand new technologies and innovations. This is what the 145-strong SCHLEICH team stands for - led by Martin & Jan-Philipp Lahrmann. Father & son. Your guarantors for long-term partnership.

Learn more about us

 

Scripts only