• +49 2372 901 25 40
    • German
    • English

PortaTest

Insulating oil tester with 60, 80, or 100 kV

Our oil tester PortaTest allows a fully-automatic detection of the dielectric strength of insulating oils.
It is well suited for both applications on-site or in laboratories. Owing to the protection cover that can be opened wide, the test vessel can comfortably be placed on the high-voltage electrodes in the test chamber.

Product consultant

You need a personal product advice?
Please use our direct contact:
+49 2372 901 25 40
Email request

Key-Facts

Indoor. Outdoor. Service.

  • Fully-automatic insulating oil tester
  • Graphical display
  • For use in laboratories
  • For mobile use on site
  • Pre-programmed test sequences according to national and international standards
  • Storage option for up to 10 self-defined test sequences
  • Short switch-off time and power-off < 1 ms avoids carbonisation
  • Average values and single breakdown values displayed
  • Easy user guidance vie 4 function keys
  • Input of sample number and temperature
  • Multilingual software
  • PC-data storage via serial RS232-interface
  • Magnetic stirrer
  • Integrated report printer (plain paper)
  • Numerous test electrodes

Variants

3 solutions for your testing task.

Please select the desired test method:

List view
Compare

PortaTest 4018302

  • 100 kV

PortaTest 4018301

  • 80 kV

PortaTest 4018300

  • 60 kV

If you haven’t found the perfect insulating oil tester yet, please do not hesitate to contact us.

We would be pleased to help you find a custom solution:

Product consultant

Product consultant

Are you looking for a personal consultation?

Please contact us directly: +49 2372 901 25 40

Or simply send us your questions via e-mail.

E-mail inquiry

Description

Normative Power.

Portatesters are easy to use. Based on the test standard, you select the corresponding test sequence.  Then,  the required test probe and the electrode gap for the selected test standard is displayed. The setting gauge, included in the scope of delivery, facilitates the adjustment of the electrode gap. Afterwards you fill the insulating oil in the test vessel and close the test chamber.

Now the test can be started. The test sequences are run fully-automatic.

The tester contains test sequences for all common national and international standards and test specifications. Furthermore you can self-define and store up to 10 test sequences in the tester. In summary, you can select from following test sequences:

  • 13 standard test sequences cosistent with the following test standards:
    • IEC 60156
    • VDE 0370/96
    • BS 5874/80
    • UTE C27-221/74
    • UNE 21309/89
    • NEN 10156
    • SEV 3141/69
    • CEI 10-1/73
    • ASTM-D 1816/90
    • ASTM-D 877/90
    • JIS 2101/82
    • JIS Si 2101/82
    • IS 6855/92
  • 10 freely-programmable test sequences
  • Short test for fast condition assessment (test duration 5 min)
  • overload test, single breakdown measurement
  • Withstand voltage test (1min … 24h) with programmable rise speed
  • Level test (1-10 levels)

Each oil sample is either marked by the PortaTest with a consecutive number or by the operator by manual number input.

A detailed test report is printed by the installed thermal printer after each test.  Beside the applied test standard the report also contains date, time, sample number, single breakdown values, average value and standard deviation.

If requested, the test results may also be tranferred from the tester to the PC by means of the software PrintCom.  They can also be stored on the PC and test reports may be printed. PrintCom saves the result in the EXCEL®-Format. The EXCEL®-form may be freely- configured by the usesr. Thanks to this, customized test reports may be easily generated.  Further details may be found under our PrintCom software.

Thanks to the clearly arranged graphical display, the operation is very easy.  Four function buttons below the display are sufficiant for the entire operation. They serve to select the test sequence, to enter data, to configure own test sequences and for the tester´s common configuration in the setup, where e.g. the language may be selected.


Technology

Benefits at a glance.

Voltage supply

  • Voltage range 100-250 V, 47-63 Hz (worldwide)
  • key switch for unlocking
  • Fuse protection 6 A

General information

  • Languages: German – English- Italian, may directly be changed in the tester
  • Free programmability of all parameters
  • Fully-automatic measurements
  • Magnetic stirrer
  • Graphical display
  • Integrated clock
  • Integrated printer
  • Integrated interface to communicate with the PC
  • Solid, portable aluminium-housing
  • W 580 mm x D 400 mm x H 440 mm
  • Operating- / and storing temperature 10°…50° C / -20°…+60° C
  • Delivery incl. calibration certificate

Test start

  • Front button to start the test

Safety

  • Test cover safety contact for double circuit safety limit switch – CAT IV

High-voltage test

  • 0-60 kV, 0-80 kV, 0-100 kV
  • R.M.S. measurement
  • voltage rise 0,1-10 KV/s

 

Normative electrodes.

Adaption to standards

  • numerous electrode shapes
  • buffer strips for gap adjustment

For further information please do not hesitate to contact our technical sales under:


print preview

Product comparison

 
 
 
 
type of tester
surge test
resistance
PE/GB
insulation
polarization index
high voltage AC
high voltage DC
partial discharge
function AC 1-phase
function AC 3-phase
sense of rotation
test terminals
test cover
automation
database
test plans
test results
communication
test report print-out
label print-out
scanner port
password protection
user management
operating system
display
battery mode
delivery
 
 
 
Abbildung MotorAnalyzer1 MotorAnalyzer1
read more  
Abbildung MotorAnalyzer2 <em>R2</em> MotorAnalyzer2 R2
read more  
Abbildung VoltageAnalyzer VoltageAnalyzer
read more  
Abbildung EncoderAnalyzer EncoderAnalyzer
read more  
Abbildung Dynamic MotorAnalyzer Dynamic MotorAnalyzer
read more  
Abbildung PortaTest PortaTest
read more  
Abbildung Wickelautomaten Winding Machines
read more  
Abbildung MotorAnalyzer1 Abbildung MotorAnalyzer2 <em>R2</em> Abbildung MTC2 Abbildung MTC3 Abbildung VoltageAnalyzer Abbildung GLP3-M Abbildung EncoderAnalyzer Abbildung Dynamic MotorAnalyzer Abbildung PortaTest Abbildung Wickelautomaten
MotorAnalyzer1
 
MotorAnalyzer2 R2
 
MTC2
 
MTC3
 
VoltageAnalyzer
 
GLP3-M
 
EncoderAnalyzer
 
Dynamic MotorAnalyzer
 
PortaTest
 
Winding Machines
 

motor Service · repairs · troubleshooting · maintenance · servicing · battery operation · PC software …

multitool · 15 test methods · surge voltage 3 kV · resistance · inductance · capacitance · motor service · repair · fault detection · maintenance · battery mode · PC software …

THE surge tester – up to 50 kV – plus normative partial discharge – resistance – 4-wire measurement – Windows10® – test protocol – PDF printing – network …

Uncompromising ALL-IN-1 winding test for production · for all standard and special motors · for automotive drives · for coils of all kinds · automation · in-line partial discharge testing – worldwide networking · central data storage …

high-precision test probe – direct surge voltage measurement at the winding – partial discharge – passive / active microwave antenna – up to 6 kV …

modular ALL-IN-1 engine test system · no limits · customer specific · VDE/EN/UL/IEC … · production · automation · global networking · databases · statistics · data import/export · Windows® · complex systems …

encoder and resolver testing/adjustment · encoder signal analysis · encoder power supply: 3 – 30 V · interface: HIPERFACE – EnDat – SSI – BiSS · BEMF measurement · repair · motor service · encoder production · servo motor production …

online monitoring · fault analysis on the running motor · for mains and frequency converters · over 100 measured values · speed · torque · efficiency · unique oscilloscope · data recorder · trend analysis · battery operation · outdoor …

insulation oil testing ⋅ fully automatic ⋅ dielectric strength ⋅ mobile ⋅ portable ⋅ on-site testing ⋅ laboratory testing ⋅ test voltages: 60 kV – 80 kV – 100 kV ⋅ various electrodes ⋅ integrated international test standards …

coil winding machines for electric motors · for repair · for motor production · standard machines · special solutions …

read more   read more   read more   read more   read more   read more   read more   read more   read more   read more  
winding testers
motor & winding testers ALL-IN-1
surge testers
winding testers
motor & winding testers ALL-IN-1
surge testers
winding testers
surge testers
winding testers
electric motor testers ALL-IN-1 encoder/resolver testers electric motor testers ALL-IN-1 insulating oil testers winding machines
0–3 kV 0–6 kV
0–12 kV
0–15 kV
0–25 kV
0–30 kV
0–40 kV
0–50 kV
0–6 kV
0–15 kV
0–6 kV 0–6 kV
4-wire measurement 4-wire measurement 4-wire measurement 4-wire measurement 4-wire measurement
1–10 A˜       6/12 Veff
1–30 A˜       6/12 Veff
1–10 A˜       6/12 Veff
1–30 A˜       6/12 Veff
custom
0–3 kV ˭ 0–6 kV ˭ Vmax like surge test Vmax like surge test 0–1 kV ˭       max. 250 GΩ
custom
Vmax like insulation test Vmax like insulation test Vmax like surge test Vmax like surge test
0–6 kV˜       max. 100 mA 0–3 kV˜       max. 100 mA
0–6 kV˜       max. 100 mA
0–6 kV˜       max. 200 mA
0–6 kV˜       max. 1 A
custom
0–3 kV˜       max. 100 mA
0–6 kV˜       max. 100 mA
0–6 kV˜       max. 200 mA
custom
0–4 kV ˭ 0–6 kV ˭ custom
in case of surge test in case of surge test
in case of high voltage test AC
in case of surge voltage and high voltage
in case of surge test in case of surge test
in case of high voltage test AC
in case of surge voltage and high voltage
according to your requirements
according to your requirements according to your requirements
yes yes yes yes yes
T1, T2, T3, frame T1, T2, T3, frame T1, T2, T3, frame
T1, T2, T3, Y, frame
K1, K2, frame
T1, T2, T3, frame
T1, T2, T3, Y, frame
3, 6, 9, 12, 15, 18, ..., frame
T1, T2, T3 L1, L2, L3, N, PE
made to your specifications
possible possible possible
with digital I/O
with RS232 via SCHLEICH communication protocol
with LAN via SCHLEICH communication protocol
with digital I/O
with RS232 via SCHLEICH communication protocol
with LAN via SCHLEICH communication protocol
with LAN via TCP/IP Socket Communication
with PROFIBUS
with PROFINET
with EtherCAT
with DeviceNet
made to your specifications
with digital I/O
with RS232 via SCHLEICH communication protocol
with LAN via SCHLEICH communication protocol
with LAN via SCPI commands
with PROFIBUS
with PROFINET
with EtherCAT
with CANopen
with CAN Automotive
with DeviceNet
made to your specifications
ACCESS
SQL
ACCESS
SQL
ACCESS
SQL
ORACLE
stored in the tester
stored in the tester and network
import from PC, PLC, MES, ...
stored in the tester
stored in the tester and network
import from PC, PLC, MES, ...
stored in the tester
stored in the tester and network
import from PC, PLC, MES, ...
cached in the tester cached in the tester cached in the tester or network
transfer to PC, PLC, MES, ...
cached in the tester or network
transfer to PC, PLC, MES, ...
cached in the tester
cached in the tester or network
transfer to PC, PLC, MES, ...
with ERP, MES, PLC, CAQ, ...
via LAN, WWW, OPC, ...
with ERP, MES, PLC, CAQ, ...
via LAN, WWW, OPC, ...
with ERP, MES, PLC, CAQ, ...
via LAN, WWW, OPC, ...
yes - via PC-Software yes - via PC-Software yes yes yes yes
yes yes yes
yes yes yes
yes yes yes yes yes
yes yes yes yes
SCHLEICH embedded SCHLEICH embedded Windows 10®-PC in the tester Windows 10®-19"-Industrial PC integrated Windows 10®-19"-Industrial PC integrated Windows 10®-PC in the tester
LCD 120 x 80 touch color LCD 480 x 272 PC monitor of any size PC monitor of any size PC monitor of any size
yes yes yes
on stock on stock on stock order-related manufacturing order-related manufacturing order-related manufacturing order-related manufacturing order-related manufacturing order-related manufacturing order-related manufacturing