Black boxes

Dummy test used for standardized functionality control

Blackbox for function tests compliant with established standards.

Key-Facts

Blackbox as proof of functionality.

  • Compact
  • Easy to handle
  • stable over time
  • Includes company calibration certificate
  • Also available with DAkkS-calibration

Varianten

Black box model 30, GB, IR, HV DC, HV AC, Fct, LC

max. high-voltage2 kV AC
dimensions250 x 160 x 57 mm (w x d x h)
connection leadSchuko type test socket
test methods
GB resistance test with GO test result or setpoint value setting
GB resistance test with NO GO test result
insulation resistance test with GO test result or setpoint value setting
insulation resistance test with NO GO test result
high-voltage test DC with GO test result or setpoint value setting
high-voltage test DC with NO GO test result
high-voltage test AC with GO test result or setpoint value setting
high-voltage test AC with NO GO test result
LC test with GO test result or setpoint value setting
LC test with NO GO test result
functional test with GO test result or setpoint value setting
functional test with NO GO test result
resistance values
GB resistance 0.2 Ω @ 10 A AC/DC
insulation resistance 2 MΩ @ 500 V DC
high-voltage 1.5 MΩ @ 1.500 V AC/DC
LC 110 kΩ @ 230 V AC/DC / 2,1 mA
function 4,7 kΩ @ 230 V AC/DC
setpoint value black boxyes
GO / NO black boxyes
CIG 021/023yes
order number40001905

Black box model 10, IR, HV DC, HV AC

max. high-voltage2 kV AC
dimensions250 x 160 x 57 mm (w x d x h)
connection leadSchuko type test socket
test methods
insulation resistance test with GO test result or setpoint value setting
insulation resistance test with NO GO test result
high-voltage test DC with GO test result or setpoint value setting
high-voltage test DC with NO GO test result
high-voltage test AC with GO test result or setpoint value setting
high-voltage test AC with NO GO test result
resistance values
insulation resistance 2 MΩ @ 500 V DC
high-voltage 1,5 MΩ @ 1.500 V AC/DC
setpoint value black boxyes
GO / NO black boxyes
CIG 021/023yes
order number40001902

Black box model 20, GB, IR, HV DC, HV AC

max. high-voltage2 kV AC
dimensions250 x 160 x 57 mm (w x d x h)
connection leadSchuko type test socket
test methods
GB resistance test with GO test result or setpoint value setting
GB resistance test with NO GO test result
insulation resistance test with GO test result or setpoint value setting
insulation resistance test with NO GO test result
high-voltage test DC with GO test result or setpoint value setting
high-voltage test DC with NO GO test result
high-voltage test AC with GO test result or setpoint value setting
high-voltage test AC with NO GO test result
resistance values
GB resistance 0.2 Ω @ 10 A AC/DC
insulation resistance 2 MΩ @ 500 V DC
high-voltage 1.5 MΩ @ 1.500 V AC/DC
setpoint value black boxyes
GO / NO black boxyes
CIG 021/023yes
order number40001903

Beschreibung

Be on the „safe side“.

For the daily, regular tester inspection a blackbox (test dummy) is connected to the respective tester. It is checked, if the measured values correspond to the values determined by the blackbox. If this is not the case, the tester locks itself and is only released if a blackbox test is performed with corresponding result. As we only deliver testers which have been digitally evaluated, this test is normally not carried out by means of a „GO/ NOGO-blackbox“, but we only use one single blackbox and evaluate the arising measuring results within straight tolerance limits.

In case a blackbox test ends with a NOGO-result (not o.k.), the tester locks itself. In this case, the reason for the deviation has to be determined and eliminated first. Only in case of a GO-result (o.k.) the tester is released.

You can configure when the blackbox tests should be carried out. This can be time-, or quantity-dependent. Normally the blackbox test is performed after switching the tester on.

Each blackbox consists of a connection to the tester and one or more precision resistors and/or inductances. They can either be intended for only one test method or for combinations of those.

Each black box is delivered with a calibration certificate and its resistance values to be able to properly adjust the black box test steps for further tests.


Technik

Technology at a glance.

Blackbox model 10

  • 1-phase
  • for test sockets
  • test methods
    • Iso insulation resistance test with GO-test result or setpoint setting
    • insulation resistance test with NOGO-test result
    • HV DC high-voltage test DC with GO-result or setpoint setting
    • high-voltage test DC with NOGO-result
    • HV AC high-voltage test AC with GO-result or setpoint setting
    • high-voltage test AC with NOGO-result
  • Setpoint-blackbox
  • GO/ NOGO blackbox
  • CIG 021/023

Blackbox model 20

  • 1-phase
  • for test sockets and test probe
  • test methods
    • PE (protective earth) resistance test with GO-result or setpoint setting
    • PE resistance test with NOGO-result
    • Iso insulation resistance test with GO-test result or setpoint setting
    • insulation resistance test with NOGO-test result
    • HV DC high-voltage test DC with GO-result or setpoint setting
    • high-voltage test DC with NOGO-result
    • HV AC high-voltage test AC with GO-result or setpoint setting
    • high-voltage test AC with NOGO-result
  • Setpoint-blackbox
  • GO/ NOGO blackbox
  • CIG 021/023

Blackbox model 30

  • 1-phase
  • for test sockets and test probe
  • test methods
    • PE (protective earth) resistance test with GO-result or setpoint setting
    • PE resistance test with NOGO-result
    • Iso insulation resistance test with GO-test result or setpoint setting
    • insulation resistance test with NOGO-test result
    • HV DC high-voltage test DC with GO-result or setpoint setting
    • high-voltage test DC with NOGO-result
    • HV AC high-voltage test AC with GO-result or setpoint setting
    • high-voltage test AC with NOGO-result
    • Abl Leakage current with GO-result or setpoint setting
    • Leakage current with NOGO-result
    • Fkt Function test with GO-result or setpoint setting
    • Function test with NOGO-result
  • Setpoint-blackbox
  • GO/ NOGO blackbox
  • CIG 021/023

Blackbox model 40

Schleich Blackbox, Prüfdummy

  • 1-phase
  • for test pistols and test probes
  • test methods
    • PE (protective earth) resistance test with GO-result or setpoint setting
    • PE resistance test with NOGO-result
    • Iso insulation resistance test with GO-test result or setpoint setting
    • insulation resistance test with NOGO-test result
    • HV DC high-voltage test DC with GO-result or setpoint setting
    • high-voltage test DC with NOGO-result
    • HV AC high-voltage test AC with GO-result or setpoint setting
    • high-voltage test AC with NOGO-result
  • Setpoint-blackbox
  • GO/ NOGO blackbox
  • CIG 021/023

Zubehör

Abbildung druckansicht

Anschlusskästen

Connection panel for connecting your device under test
  • 1, 2, 3 or 4 test sockets for different country standards
  • quick pressure clamps for single leads
  • 4 mm laboratory sockets
  • high current socket for protective conductor test probe
  • for single-phase and three-phase test objects
  • customized solutions
  • SCHLEICH GmbH
  • An der Schleuse 11
  • 58675 Hemer | Germany
  • +49 (0) 23 72-94 98-0
  • +49 (0) 23 72-94 98-99
  • info(at)schleich.com