Test Probes

For manual PE, insulation resistance and leakage current tests

A wide variety of probes are available for PE/GB-testing as well as insulation resistance tests. Probes can be selected based on features such as their size, the maximum test current during PE tests, whether a built-in start button is required or if a built-in test result light is needed.

Key-Facts

Sophisticated test probes for efficient measurements.

  • Solid and industry-proven
  • Exchangeable test probe tips
  • 4-wire technology up to the test tip- essential for optimum measuring results
  • with built-in signal-LEDs
  • with built-in start button
  • for a variety of PE-test currents

Varianten

Test probe small, 10-30 A, without start button, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length1.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug

Test probe small, 10-30 A, without start button, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length4.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug

Test probe small, 10-30 A, without start button, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length9.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug

Test probe small, 10-30 A, with start button, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length1.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

Test probe small, 10-30 A, with start button, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length4.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

Test probe small, 10-30 A, with start button, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length9.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

GB test probe, with 2 contact pins, with start button, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length1.85 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

GB test probe, with 2 contact pins, with start button, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length5 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

GB test probe, with 2 contact pins, with start button, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length10 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

Test probe GB10 A - & insulation for norm EN60204, 10 m

for following testersGLP1-g
cable length10 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coverno

Test probe GB10 A - & insulation for norm EN60204, with protective cover, 2 m

for following testersGLP1-g
cable length2 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coveryes - included in delivery

Test probe GB10 A - & insulation for norm EN60204, with protective cover, 10 m

for following testersGLP1-g
cable length10 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coveryes - included in delivery

GB test probe 10 A, with start button and LED, 2.5 m

for following testersGLP2-MODULAR, GLP3
overall length280 mm
handle diameter35 mm
handle length160 mm
cable length2.5 m with 19-pole plug
power resistor0.018 Ω
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the front of the tester

GB test probe 30 A, with start button and LED, 2.5 m

for the following testersGLP2-MODULAR, GLP3
overall length280 mm
handle diameter35 mm
handle length160 mm
cable length2.5 m with 19-pole plug
power resistor0.009 Ω
4-wire measurementyes, up to the peak of the test probe
test current25-30 A
test peakexchangeable
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the front of the tester

GB test probe 40-75 A, with start button and LED, 2 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length2 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester

GB test probe 40-75 A, with start button and LED, 5 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length5 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester

GB test probe 40-75 A, with start button and LED, 10 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length10 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester

GB test probe 30 A, with start button, 2.5 m

for following testersGLP2-MODULAR, GLP3
overall length230 mm
handle diameter35 mm
handle length120 mm
cable length2.5 m with 19-pole plug
power resistor0,018 Ω
4-wire measurementyes, up to the peak of the test probe
test current30 A
test peakexchangeable
buttonwith start function
connection pointat the front of the tester

GB test probe 40-75 A, 2 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length2 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
connection pointat the rear of the tester

GB test probe 40-75 A, 5 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length5 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
connection pointat the rear of the tester

GB test probe 10 A, 2.5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwithout start button
connection pointat the rear of the tester

GB test probe 10 A, with start button, 2.5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwith start button
connection pointat the rear of the tester

GB test probe 10 A, with start button and LED, 2.5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwith start button
connection pointat the rear of the tester
LEDdisplay of the result

Test probe for GB and insulation resistance, 10 A, 2 m

for following testersHandHeld
cable length2 m
measurement technology4-wire measurement
test current10 A
test peakexchangeable
connection pointat the rear of the tester

Test probe for GB and insulation resistance, 10 A, with start button, 2 m

for following testersHandHeld
cable length2 m
measurement technology4-wire measurement
test current10 A
test peakexchangeable
connection pointat the rear of the tester
start buttonincluded

Beschreibung

Ergonomics. Reliability.

SCHLEICH offers a variety of test probes for PE-, and insulation resistance tests. The probes differ in size, maximum test current at the PE-test, if a start button or if a result light is integrated  in the test probe.

The test probes are completely manufactured in 4-wire-technology which assures perfect measuring results without the negative influence from the leads.

  • SCHLEICH GmbH
  • An der Schleuse 11
  • 58675 Hemer | Germany
  • +49 (0) 23 72-94 98-0
  • +49 (0) 23 72-94 98-99
  • info(at)schleich.com