Prüfsonden

Zur manuellen Schutzleiter-, Isolations- sowie Ableitstromprüfung

Für die Schutzleiter- und Isolationswiderstandsprüfung stehen unterschiedlichste Sonden zur Verfügung. Die Sonden unterscheiden sich hinsichtlich ihrer Baugröße, durch den maximalen Prüfstrom bei der Schutzleiterprüfung, ob ein integrierter Starttaster benötigt wird und ob in der Sonde eine Leuchte zur Anzeige des Ergebnisses integriert ist.

Key-Facts

Durchdachte Prüfsonden für effektives Arbeiten.

  • Solide und industriegerecht
  • Austauschbare Prüfspitze
  • Bis zur Prüfspitze in Vierleitertechnik – die Voraussetzung für optimale Messergebnisse
  • Ausführung mit integrierten Signal-LEDs
  • Ausführung mit integriertem Starttaster
  • Für unterschiedlichste PE-Prüfströme

Varianten

Prüfsonde klein, 10-30 A, ohne Starttaster, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length1.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug

Prüfsonde klein, 10-30 A, ohne Starttaster, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length4.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug

Prüfsonde klein, 10-30 A, ohne Starttaster, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length9.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwithout start button
type of connection8-pole plug

Prüfsonde klein, 10-30 A, mit Starttaster, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length1.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

Prüfsonde klein, 10-30 A, mit Starttaster, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length4.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

Prüfsonde klein, 10-30 A, mit Starttaster, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length9.85 m
4-wire measurementyes, up to the peak of the test probe
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

PE-Prüfsonde, mit 2 Kontaktstiften, mit Starttaster, 2 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length1.85 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

PE-Prüfsonde, mit 2 Kontaktstiften, mit Starttaster, 5 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length5 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

PE-Prüfsonde, mit 2 Kontaktstiften, mit Starttaster, 10 m

for following testersGLP1-g, GLP2-BASIC
overall length240 mm
handle diameter35 mm
handle length160 mm
cable length10 m
4-wire measurementyes, via two spring-loaded contact pins
test currentmax. 30 A
test peakexchangeable
buttonwith start button
type of connection8-pole plug

Prüfsonde PE10 A - & Iso für Norm EN60204, 10 m

for following testersGLP1-g
cable length10 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coverno

Prüfsonde PE10 A - & Iso für Norm EN60204, mit Kappe, 2 m

for following testersGLP1-g
cable length2 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coveryes - included in delivery

Prüfsonde PE10 A - & Iso für Norm EN60204, mit Kappe, 10 m

for following testersGLP1-g
cable length10 m
test current10 A
test peakexchangeable
buttonwith start function
toggle switchselector switch for GB or insulation test
type of connection8-pole plug
protective coveryes - included in delivery

Schutzleiterprüfsonde 10 A, mit Starttaster und LED, 2,5 m

for following testersGLP2-MODULAR, GLP3
overall length280 mm
handle diameter35 mm
handle length160 mm
cable length2.5 m with 19-pole plug
power resistor0.018 Ω
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the front of the tester

Schutzleiterprüfsonde 30 A, mit Starttaster und LED, 2,5 m

for the following testersGLP2-MODULAR, GLP3
overall length280 mm
handle diameter35 mm
handle length160 mm
cable length2.5 m with 19-pole plug
power resistor0.009 Ω
4-wire measurementyes, up to the peak of the test probe
test current25-30 A
test peakexchangeable
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the front of the tester

Schutzleiterprüfsonde 40-75 A, mit Starttaster und LED, 2 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length2 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester

Schutzleiterprüfsonde 40-75 A, mit Starttaster und LED, 5 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length5 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester

Schutzleiterprüfsonde 40-75 A, mit Starttaster und LED, 10 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length10 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
LEDtricolored (red/yellow/green)
LED = yellowtest is running
LED = greentest result ok
LED = redtest result not ok
buttonwith start function
connection pointat the rear of the tester

Schutzleiterprüfsonde 30 A, mit Starttaster, 2,5 m

for following testersGLP2-MODULAR, GLP3
overall length230 mm
handle diameter35 mm
handle length120 mm
cable length2.5 m with 19-pole plug
power resistor0,018 Ω
4-wire measurementyes, up to the peak of the test probe
test current30 A
test peakexchangeable
buttonwith start function
connection pointat the front of the tester

Schutzleiterprüfsonde 40-75 A, 2 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length2 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
connection pointat the rear of the tester

Schutzleiterprüfsonde 40-75 A, 5 m

for following testersGLP1-g
overall length290 mm
handle diameter35 mm
handle length160 mm
cable length5 m
power resistor0.0045 Ω
4-wire measurementyes, up to the peak of the test probe
test currentmax. 75 A
test peakexchangeable, made of brass
connection pointat the rear of the tester

Schutzleiterprüfsonde 10 A , 2,5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwithout start button
connection pointat the rear of the tester

Schutzleiterprüfsonde 10 A, mit Starttaster, 2,5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwith start button
connection pointat the rear of the tester

Schutzleiterprüfsonde 10 A, mit Starttaster und LED, 2,5 m

for following testersHandHeld
overall length230 mm
handle diameter25 mm
handle length120 mm
cable length2.5 m with plug
4-wire measurementyes, up to the peak of the test probe
test current10 A
test peakexchangeable
buttonwith start button
connection pointat the rear of the tester
LEDdisplay of the result

PE- und Isoprüfsonde, 10 A , 2 m

for following testersHandHeld
cable length2 m
measurement technology4-wire measurement
test current10 A
test peakexchangeable
connection pointat the rear of the tester

PE- und Isoprüfsonde, 10 A, mit Starttaster , 2 m

for following testersHandHeld
cable length2 m
measurement technology4-wire measurement
test current10 A
test peakexchangeable
connection pointat the rear of the tester
start buttonincluded

Beschreibung

Ergonomie. Zuverlässigkeit.

Für die Schutzleiter- und Isolationswiderstandsprüfung stehen unterschiedlichste Sonden zur Verfügung. Die Sonden unterscheiden sich durch die Baugröße, durch den maximalen Prüfstrom bei der Schutzleiterprüfung, ob ein integrierter Starttaster in der Sonde ist und ob in der Sonde eine Leuchte zur Anzeige des Ergebnisses ist.

Die Prüfsonden sind komplett in Vierleitertechnik ausgeführt.
Dies garantiert optimale Messergebnisse ohne den negativen Einfluss der Zuleitungen.

  • SCHLEICH GmbH
  • An der Schleuse 11
  • 58675 Hemer | Germany
  • +49 (0) 23 72-94 98-0
  • +49 (0) 23 72-94 98-99
  • info(at)schleich.com