Your local contact:test method
impedance
Impedance measurement is performed using high-precision measurement methods that enable reliable and reproducible evaluation. In practice, both specialized hardware components developed by SCHLEICH and RLC measuring bridges from renowned manufacturers are used, which operate with precise four-wire measurement technology, thus ensuring the highest measurement accuracy.
The components are fully built-in into the SCHLEICH test system. All relevant measurement parameters, such as the test frequency, can be flexibly and operator-friendly adjusted directly in the SCHLEICH test device. This allows the measurement to be optimally adapted to a wide range of devices under test and requirements.
For a fast and automated GO/NO-GO evaluation, the operator defines an impedance set value and an allowable percentage tolerance. The measurement results are then automatically evaluated, ensuring transparent, secure, and efficient test processes.
What products does SCHLEICH supply?
- Combination test devices (combination with further safety or function tests)
- Measuring bridge
- Semi-manual tests
- Fully automated test sequences
- Test devices of various device classes
Test devices and Test systems
MotorAnalyzer3
The mobile ALL-IN-ONE professional model for your Motor service
CHECK YOUR MOTOR'S HEALTH!
For electric motor service and repair
For electric motor repair
For maintenance, servicing, and service
- Globally unique – the mobile ALL-IN-ONE test device
- AutoTest – the fastest troubleshooting
- Battery operation – Test nonstop
- surge test up to 3 kV | 0.45 Joule
- High voltage DC up to 6 kV
- Insulation up to 500 GΩ
- Polarization index and DAR
- LCR measurement
- Automatic measurement between the four relevant Connection points of the three-phase Motor
- three winding Connections
- one housing Connection (laminated core or Motor housing)
- Communication with
«» PC via Bluetooth
MTC2 R7
Universal winding Test devices 6, 12, 15, 30, 40 and 50 kV
MTC2 winding Test systems are very compact, fully automatic high-end Test devices for a wide variety of winding goods in development, production, and Test laboratory.
For production, EOL, automation
For test laboratory, R&D, approval, certification tests
For repair, maintenance, and service
surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between phases
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Conducted coupling
ohmic resistance
-
- Winding
- Temperature sensor
insulation resistance
-
- IR
- PI
- DAR
High voltage AC optional
Test connections
-
- Standard: 4
- Optional: 7 and more
MTC3 R2
The high-end test systems for Motor production – without limit
MTC3 winding test systems are fully automatic high-end test devices for various winding goods in development, production, and test laboratories.
For production, EOL, automation
For test laboratory, R&D, approval, certification tests
- Testing of stators, rotors, transformers and inductors
- Surge test up to 15 kV
- Fully built-in partial discharge test according to IEC 61934 and DIN EN 60034-18-41
- Resistance measurement in four-wire technology with temperature compensation
- Insulation resistance test with automatic PI measurement
- Inductance test | LCR inductance measurement bridge
- High voltage test AC according to VDE standard
- Partial discharge at high voltage AC
- Insulation test DC
- Precise four-wire resistance measurement with temperature compensation down to the µΩ-space
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
GLP2-MODULAR
Multifunction test device with up to 25 test methods
- “All in one”
- Safety test devices
- Safety & functional test devices
- Modularly combinable from over 25 test methods
- Up to 250 test connections
- Switching matrixes for all types of test methods
- PL e, SIL 3, two-hand control Type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- Network
- Protocol & label printing
- Scanner …
- Technology Package for even greater ergonomics
GLP3
Class-leading test technology unlimited
The top class of test and measurement technology for safety & function test.
- “All in one”
- Safety & functional test devices
- For complex projects
- For complex automation
- For highest demands
- Modularly combinable from over 30 test methods
- Up to 350 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation 2-channel safety
- Windows 11®
- Network
- Protocol & label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, …
- Interfaces to MES, ERP, CAQ systems, …
GLP3-M
Electric motor Test - EOL, Series and Laboratory
For production, EOL and automation
For test laboratories
Test benches for functional and safety testing of all types of Motors.
- Asynchronous Motors
- Synchronous Motors
- Linear Motors
- Stepper Motors
- BLDC
- DC Motors
- …
- Motor attachments
– Brake
– Temperature sensors
– Humidity sensors
– Auxiliary heating
– Fan
– Centrifugal switch
– Rotor position sensors, Encoders, Resolvers, Multiturn encoders …
– Electronic nameplate
* indicates required fields