Your local contact:Test devices and systems for all aspects of windings & Motors
Electric Drive ⋅ coil ⋅ Generator ⋅ Transformer ⋅ Online Monitoring ⋅ Encoder ⋅ Resolver …
Winding and electric motor test devices from SCHLEICH.
Production machines for windings and stators from SCHLEICH.
Product filter
Please select the desired property:
MTC2 R7
Universal winding Test devices 6, 12, 15, 30, 40 and 50 kV
MTC2 winding Test systems are very compact, fully automatic high-end Test devices for a wide variety of winding goods in development, production, and Test laboratory.
For production, EOL, automation
For test laboratory, R&D, approval, certification tests
For repair, maintenance, and service
surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between phases
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Conducted coupling
ohmic resistance
-
- Winding
- Temperature sensor
insulation resistance
-
- IR
- PI
- DAR
High voltage AC optional
Test connections
-
- Standard: 4
- Optional: 7 and more
GLP2-R
For EOL testing
For fast automation processes and inline quality assurance
For laboratories and manual measurements
- Four-wire technology, eliminates line and contact resistances
- Measurement cable break detection
- Contacting error detector
- Temperature compensation for temperature-dependent resistances
- Surface or ambient temperature measurement
- Automatically executing test steps
- Built-in switch-over between different test points
- Test points modularly expandable with relay matrices
Communication with
«» PC
«» PLC
«» LabVIEW®
«» MES / ERP
«» Fieldbus e.g. PROFIBUS …
«» Industrial Ethernet e.g. PROFINET, EtherCAT, EtherNet/IP, Modbus-TCP …
MotorAnalyzer1
The entry-level model for your Motor service
CHECK YOUR MOTOR'S HEALTH!
For electric motor service and repair
For electric motor repair
For maintenance, servicing, and service
- Universal stator-, armature-, Motor- and transformer testing equipment
- 10 built-in test methods
- Automatic measurement between the three Connections of a three-phase Motor
- Built-in results database
- Transmission of the results via RS-232 or USB interface to the PC
- Mains-independent battery operation with battery status indicator
- Extremely compact design
- Ideal tool for on-site use and for the workshop
MotorAnalyzer3
The mobile ALL-IN-ONE professional model for your Motor service
CHECK YOUR MOTOR'S HEALTH!
For electric motor service and repair
For electric motor repair
For maintenance, servicing, and service
- Globally unique – the mobile ALL-IN-ONE test device
- AutoTest – the fastest troubleshooting
- Battery operation – Test nonstop
- surge test up to 3 kV | 0.45 Joule
- High voltage DC up to 6 kV
- Insulation up to 500 GΩ
- Polarization index and DAR
- LCR measurement
- Automatic measurement between the four relevant Connection points of the three-phase Motor
- three winding Connections
- one housing Connection (laminated core or Motor housing)
- Communication with
«» PC via Bluetooth
MTC2
Surge tester with 6, 12, 15, 25, 30, 40 or 50 kV
For production, EOL, and automation
For test laboratories
For repair, maintenance, and service
- surge test
- Phase comparison measurement
- Peak-to-peak measurement method
- Partial discharge during surge test
- according to EN60…… ?
- Simulation of inverter operation
- ohmic resistance
- Winding
- Temperature sensor
- Insulation resistance, PI, DAR
- 4 winding test connections, optionally more
MTC3 R2
The high-end test systems for Motor production – without limit
MTC3 winding test systems are fully automatic high-end test devices for various winding goods in development, production, and test laboratories.
For production, EOL, automation
For test laboratory, R&D, approval, certification tests
- Testing of stators, rotors, transformers and inductors
- Surge test up to 15 kV
- Fully built-in partial discharge test according to IEC 61934 and DIN EN 60034-18-41
- Resistance measurement in four-wire technology with temperature compensation
- Insulation resistance test with automatic PI measurement
- Inductance test | LCR inductance measurement bridge
- High voltage test AC according to VDE standard
- Partial discharge at high voltage AC
- Insulation test DC
- Precise four-wire resistance measurement with temperature compensation down to the µΩ-space
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
VoltageAnalyzer
Precise surge test directly on the winding
For production and test laboratories.
- Direct voltage measurement on the device under test – no line-induced influences
- 3-channel precision high-frequency probe
- Super fast measurement
- High measurement resolution
- Plus partial discharge measurement with passive or active antenna
- Built-in measurement point switch-over
- Ideal for demanding tests
GLP3-M
Electric motor Test - EOL, Series and Laboratory
For production, EOL and automation
For test laboratories
Test benches for functional and safety testing of all types of Motors.
- Asynchronous Motors
- Synchronous Motors
- Linear Motors
- Stepper Motors
- BLDC
- DC Motors
- …
- Motor attachments
– Brake
– Temperature sensors
– Humidity sensors
– Auxiliary heating
– Fan
– Centrifugal switch
– Rotor position sensors, Encoders, Resolvers, Multiturn encoders …
– Electronic nameplate
EncoderAnalyzer
Test and adjust rotor position encoders
CHECK YOUR MOTOR'S HEALTH!
Troubleshooting and angle adjustment on Encoders, Resolvers, Absolute encoders …
What is the cause of the problem?
The EncoderAnalyzer supports troubleshooting and analysis of why a Motor does not run with encoder.
For electric motor service and repair
For electric motor repair
For maintenance, servicing, and service
Detailed automatic encoder signal analysis
-
- Resolver
- Magnetic encoders
- Optical encoders
- Incremental encoders
- SinCos encoders
- Absolute encoders (single-turn and multi-turn)
- Communication via Hiperface, EnDat, SSI, BiSS…
Error angle measurement of rotor and encoder angle on the synchronous Motor
-
- Support for manual angle adjustment
- Setting the encoder zero point
- Writing the angle offset to the encoder
Synchronous Motor test
-
- BEMF measurement
- Determination of the ke-value during coasting
Dynamic-MotorAnalyzer
Online Monitoring and Troubleshooting for electric Motors
CHECK YOUR MOTOR'S HEALTH!
Troubleshooting & Online Monitoring on running Motors/Generators.
What is the cause of the problem?
The Dynamic-MotorAnalyzer supports fault diagnosis and analysis.
For electric motor service and repair
For electric motor repair
For maintenance, servicing, and service
- Suitable for mains and frequency converter operation
- Electrical mains and Motor input data
- Energy consumption, utilization, efficiency …
- Mechanical power, torque …
- Unique multifunctional oscilloscope
- Data recorder for long-term measurements
- Data recorder for real-time measurement data and playback for later analysis
- Trend analysis for predictive maintenance
PortaTest
Insulating oil and transformer oil testers with 60, 80 or 100 kV
Fully automatic determination of the dielectric strength of insulating oils.
- 3 device variants: 60 kV – 80 kV – 100 kV
- Portable
- On-site testing
- Laboratory testing
- Test cell with magnetic stirrer
- Test sequences for 13 international standards built-in
Winding machines
Coil winding machines for electric motors
Winding machines produce coils/windings which are typically used in asynchronous and DC Motors.
The coils, adjustable in length and width, are automatically wound into templates.
The coils are removed from the machine manually by hand or semi-automatically using a transfer tool.
For repair, production, R&D …
No testing device found? – No problem!
We configure your modular solution – ask us.
How to find the right testing device
The number of testing devices available on the market is vast, but not every feature is required for every application. Therefore, SCHLEICH offers one of the most comprehensive device portfolios – tailored to your specific requirements.
Winding test of stator and Motor
- Standard-compliant surge test
- Partial discharge IEC 61934 and DIN EN 60034-18-41
- insulation resistance
- High voltage AC/DC
- Partial discharge AC
- Winding resistance
- inductance
- Capacitance
- Rotating field/sense of rotation
- And more …
Testing of electrical Motors
- Electrical safety
- High voltage AC/DC
- Partial discharge AC
- Insulation
- PI, DAR
- protective earth conductor
- Function
- Encoder testing and adjustment
- No-load and load operation
- Torque/Speed
- sense of rotation
- Brakes
- Uk
- Vibration
- Tightness
- Endurance run
- Temperature rise test
- Rotor
- EOL
- And more …
SCHLEICH is a pioneer in winding and Motor testing. Over 35 years of experience with surge test and numerous innovations distinguish our company. Thousands of winding testing devices with enthusiastic customers worldwide serve as proof.
Thanks to the intuitive and convenient operation of our testing devices, every test is performed quickly, precisely, and cost-effectively.
The SCHLEICH Product Portfolio – Expect more!
Test devices and systems
- Single and Multifunction Test Devices
- Automatic test systems/test systems with relay matrix
(2, 3, 4, 6, 9, 12, 15, 18, 21 … 100 terminals) - Complete test workstations
- Production lines with transfer systems
- EOL workstations
- Large-scale systems
Contacting and interfaces
- Test Tips
- Test probes.
- Test adapters
- Test covers
- Modular contacting
- Kelvin test tong – four-wire measurement
- Interfaces for automation
- Interfaces to ERP systems
- Interfaces to MES systems
- Networking of test devices
- Statistical analysis tools
- and much more …
Comprehensive service
- Professional consultation with technical expertise
- Thorough initial Commissioning
- Regular certified calibration
- After-sales support by our service team
- Service by phone, via remote maintenance, or on-site
- Tailored training courses
- SCHLEICH.CARE.PREMIUM
Do you require personal product consultation?
We gladly provide you with comprehensive support and advice on all our products and services.
Call us or send us an email!