Know How
Test method, matrix, and station switch-over




SCHLEICH test technology proves its worth in daily use. Our goal is to perform a Test as quickly and efficiently as possible. This creates high utility value.
To save time, the operator connects all terminals of the device under test using a contact adapter. The tester then performs the test fully automatically between all terminals without the operator having to reconnect any wires. This is made possible by SCHLEICH’s signature “ automatic test method switch-over .”
Many motors have more than three terminals. It is more cost-effective to first connect all of the test object’s terminals to the test equipment. The test equipment then performs all tests fully automatically between all terminal points. This is significantly more effective than performing partial tests. We implement the switch-over between the various terminals using flexible switching matrices.
It stands to reason that test specimens with many connections require more time for connection and disconnection than those with only one connection cable. To save time in such cases, we implement dual-station or multi-station systems. While connection and dis discharge s are performed at one station, testing proceeds in parallel at the other stations. This approach allows for highly cost-effective results during complex and extensive tests.
TEST METHOD SWITCH-OVER
Depending on the type and scope of the test methods provide , a wide variety of switching configurations are available. These to ensure enable quick and automatic switching between the different test methods.
Because the voltage differences between test methods can be very high, the " safety " is the top priority when switching between methods. A Resistance test rated at 3 V must be connected to the device under test just as reliably as a high voltage test rated at 6,000 V—to protect your test specimen and, of course, to protect the operator. There can be no compromises here. That is why, for switching circuits and matrices, we use only high-quality components—proven tens of thousands of times over—that are either manufactured in-house or sourced from renowned German manufacturers.

MATRICES
At provide , we have the right relay matrix for virtually any task. Matrices differ in the number of connections and the voltage level of the signals to be switched TEST VOLTAGE. A matrix must switch 6,000 V just as safely and reliably as it does millivolt signals. That is exactly why our technicians developed these matrices.
Matrices are designed for two-wire and four-wire applications. They can be daisy-chained to increase the number of Connections as desired. Matrices with more than 100 Connection points are not uncommon. For matrices – as for test method switch-overs – only the best quality is used.

STATION SWITCH-OVER
Instead of using two or more test devices, station switch-overs represent an economical alternative.
High safety standards apply to station switching operations. While a test is in progress at one station, the other station is simultaneously unloaded and reloaded. During this process, the operator inevitably comes into contact with the terminals and connecting cables. It is essential to prevent any electrical hazard to the operator. To do this, the test leads to the stations where no testing is currently taking place must be safely disconnected. In addition, it is recommended to ground the connections to the device under test .

MECHATRONICS | SCRIPT CONTROL
In addition to powerful hardware, our software also offers an exceptionally high degree of flexibility. Thanks to its integrated scripting and control functions, the tester provides comprehensive PLCcapabilities directly within the test instrument—an external PLC is not required.
Inputs can be monitored, outputs can be selectively switched, and logical operations can be performed—similar to a traditional PLC, but fully built-in.
The key advantage lies in the ability to directly control mechatronic functional sequences via the test device itself. Valves can be activated, monitored limit switch , measured values analyzed, and sequence conditions defined. The tester can execute additional functional sequences before, during, and after the actual test.
And best of all: You can implement all of these features on your own—without additional hardware, without external PLC , and without additional costs.
This makes the system ideal for customer-specific test setups as well as for seamless integration into automated manufacturing and testing environments—with minimal integration effort.

Test devices and Test systems
Relay matrix modules
More test points? No problem!
- High voltage AC up to 6 kV | DC up to 8.5 kV
- 6 / 12 / 24 test points in two-wire technology
- 3 / 6 / 12 checkpoints in four-wire technology
- Integrated discharge
- Infinitely cascadeable – scalable matrix solution
- CAN bus or digital interface
- Housing variants: 19" rack, desktop, control cabinet
GLP1-g
protective earth conductor-, Insulation, High-Voltage, and Functional Tester
Smallest safety test device in the world!
- Protective earth conductor test devices
- Insulation test devices
- High voltage test devices AC/DC
- Safety & functional test devices
- 50+ device variants – combined from up to 9 test methods
- PL e, SIL 3, two-hand control Type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- desktop device or 19-inch rack mounting
- ½ 19″ or 19″ format
GLP2-BASIC
protective earth conductor-, Insulation, High-Voltage, leakage current, Resistance, and Functional Testers
- Insulation test devices
- High voltage test devices AC/DC
- “All in one” test devices
- Safety & functional test devices
- Approx. 40 device variants – combined from up to 21 test methods
- PL e, SIL 3, two-hand control Type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- Network
- protocol- & Label Printing
- Scanner …
- Technology Package for even greater ergonomics
- desktop device or 19-inch rack mounting
GLP2-MODULAR
Multifunction test device with up to 25 test methods
- “All in one”
- Safety test devices
- Safety & functional test devices
- Modularly combinable from over 25 test methods
- Up to 250 test connections
- Switching matrixes for all types of test methods
- PL e, SIL 3, two-hand control Type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- Network
- protocol- & Label Printing
- Scanner …
- Technology Package for even greater ergonomics
GLP2-R
For EOL testing
For fast automation processes and inline quality assurance
For laboratories and manual measurements
- Four-wire technology, eliminates line and contact resistances
- Measurement cable break detection
- Contacting error detector
- Temperature compensation for temperature-dependent resistances
- Surface or ambient temperature measurement
- Automatically executing test steps
- Integrated switch-over between different checkpoints
- Test points modularly expandable with relay matrices
Communication with
«» PC
«» PLC
«» LabVIEW®
«» MES / ERP
«» Fieldbus, e.g., PROFIBUS …
«» Industrial Ethernet, e.g., PROFINET, EtherCAT, EtherNet/IP, Modbus-TCP …
GLP2-Technology Package
GLP2 meets Windows 11®
- Maximum Windows 11® performance for GLP2
-
Performance upgrade for GLP2-BASIC and GLP2-MODULAR
-
Full-fledged Windows 11® on external PC
-
Maximum ease of use
-
Intuitive user guidance
-
Optimized visualization and faster inputs
-
built-in s seamlessly into your IT environment
-
Plug-and-play integration into the company network
GLP3
Class-leading test technology unlimited
The top tier of testing and measurement technology for safety and function test.
- “All in one”
- Safety & functional test devices
- For complex projects
- For complex automation
- For highest demands
- Modularly combinable from over 30 test methods
- Up to 350 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, 2-channel two-hand control safety
- Windows 11®
- Network
- protocol- & Label Printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, …
- Interfaces to MES, ERP, CAQ systems, …
MTC2 R7
Universal winding Test devices 6, 12, 15, 30, 40 and 50 kV
MTC2 winding Test systems are very compact, fully automatic high-end Test devices for a wide variety of winding goods in development, production, and Test laboratory.
For production, EOL, automation
For test laboratory, R&D, approval, certification tests
For repair, maintenance, and service
surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between phases
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Conducted coupling
ohmic resistance
-
- Winding
- Temperature sensor
insulation resistance
-
- IR
- PI
- DAR
High voltage AC optional
Test connections
-
- Standard: 4
- Optional: 7 and more
MTC3 R2
The high-end test systems for Motor production – without limit
MTC3 winding test systems are fully automatic high-end test devices for various winding goods in development, production, and test laboratories.
For production, EOL, automation
For test laboratory, R&D, approval, certification tests
- Testing of stators, rotors, transformers and inductors
- Stoßspannungsprüfung bis 15 kV
- Fully built-in partial discharge test according to IEC 61934 and DIN EN 60034-18-41
- Resistance Measurement in " four-wire technology " with Temperature Compensation
- Insulation resistance test with automatic PI measurement
- Inductance test | LCR inductance measurement bridge
- high voltage test AC in accordance with the VDE standard
- Partial discharge at high voltage AC
- insulation test DC
- Precise four-wire resistance measurement with temperature compensation down to the µΩ rangespace
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
High voltage relays
Safely switching and disconnecting high voltage
- Safe isolation
- With single or double changeover contact
- SPDT "Single Pole Double Throw"
- For DIN 50022 DIN rail
- Proven components
"*" indicates required fields

