The SCHLEICH CONCEPT
Customized testing systems – for electric motors and windings
With the SCHLEICH CONCEPT, you can put together exactly the test device you need. And not by installing various individual test devices in an oversized test rack, but by integrating all tests into a compact, modular housing. The size of the test device is ultimately determined by the type and scope of the integrated tests, their electrical power requirements, and the number of test points.
Your perfect test equipment configuration—thanks to the SCHLEICH CONCEPT!
MTC3
High-end testing systems for engine production – without limits
MTC3 winding test systems are fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
- Testing of stators, rotors, transformers, and chokes
- surge test 15 kV
- Fully integrated partial discharge testing in accordance with IEC 61934 and DIN EN 60034-18-41
- Resistance measurement using four-wire technology temperature compensation
- Insulation resistance test with automatic PI measurement
- Inductance testing | LCR inductance measuring bridge
- high voltage test according to VDE standard
- Partial discharge at high voltage AC
- insulation test
- Precise four-wire with temperature compensation down to thespace
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
Good to know:
The SCHLEICH CONCEPT
Configure your testing device to perfectly suit your specific requirements. The SCHLEICH CONCEPT offers a wide range of possible combinations of different testing methods. The testing methods you select from a large pool of testing options are determined by your individual testing task.
Whether you need one test method a variety of them, you determine the configuration! For example, your test device can be configured as high voltage test device special high voltage test device many test outputs. For more complex test tasks, you may need a combination of all possible test methods.
The flexibility of SCHLEICH CONCEPT is evident not only in the housing, but also in the number and arrangement of the test device's connections. With the 19" container and especially with the 19" industrial cabinet, the measurement connections can be attached to all sides of the test device. This allows us to meet all spatial requirements.
Configuration examples
Your individual requirements define the housing size
The test devices provide a wide range of testing options in a single provide very compact housing. The combination of test methods according to the SCHLEICH CONCEPT therefore also includes a modular housing concept.
Depending on your requirements, your application can be housed in a compact desktop device, a 19" plug-in unit, a 19" container, or a 19" industrial cabinet. We use precisely fitting housing components from renowned German manufacturers as well as components from our own production to ensure the professional and safe installation of the testing technology.
This impressive flexibility gives you a significant functional and economic advantage. Every testing device incorporates the experience gained from many thousands of installations. At SCHLEICH , this experience is applied SCHLEICH , passionately, and without compromise.
That is "customer-based technology."
The SCHLEICH – Expect more!
Testing equipment and systems
- Single-function and multifunction testers
- Testing machines/testing systems with relay matrix
(2, 3, 4, 6, 9, 12, 15, 18, 21 … 100 terminals) - Complete test workstations
- Production lines with transfer systems
- EOL workstations
- large-scale plants
Contacts and interfaces
- test probes
- test adapter
- test hoods
- Modular contacts
- Interfaces for automation
- Interfaces to ERP systems
- Interfaces to MES systems
- Networking of test equipment
- Statistical analysis tools
- and much more …
full-service
- Professional advice with technical expertise
- Careful initial commissioning
- Regular certified calibration
- After-sales support from our service team
- Service by phone, remote maintenance, or on-site
- Customized training courses
- SCHLEICH.CARE.PREMIUM
Do you require personal product advice?
We would be happy to provide you with comprehensive support and advice regarding all our products and services.
Call us or send us an email!