camp
SCHLEICH testing systems forintermediate and final inspection ofelectric motorsfor the entire motor production process.
From Test entire motor to testing the windings, you receive all safety and quality testing methods from a single source.
testing methods
- vibration
- oscillation
- Tension between rotor, bearing, and bearing shield
- Errors during motor assembly
- balancing
- end of life
- and more
From simple idle test benches to complex load test benches, including all attachments, SCHLEICH is at SCHLEICH side.
Many manufacturers of standard and special motors worldwide rely on our testing technology.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
Mechanical specification
SCHLEICH testing systems for intermediate and final inspection ofelectric motorsfor the entire motor production process.
From Test entire motor to testing the windings, you receive all safety and quality testing methods from a single source.
testing methods
- Idle and load operation
- Mechanical function and data
- heating test
- Endurance run with load profile
- sense of rotation
- rotational speed
- torque
- holding torque
- torque ripple
- Including complete mechanical test setup and adaptation
- end of life
- and more
From simple idle test benches to complex load test benches including all attachments, SCHLEICH is SCHLEICH your side.
Many manufacturers of standard and special motors worldwide rely on our testing technology.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
From laboratory testing equipment for research and development to fully automated testing systems, you can obtain everything from a single source.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
rotor quality
SCHLEICH testing systems forintermediate and final inspection ofelectric motorsfor the entire motor production process.
testing methods
- rotor quality
- Including complete mechanical test setup and adaptation
- end of life
- and more
From simple idle test benches to complex load test benches, including all attachments, SCHLEICH is at SCHLEICH side.
Many manufacturers of standard and special motors worldwide rely on our testing technology.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
From laboratory testing equipment for research and development to fully automated testing systems, SCHLEICH is your one-stop shop for SCHLEICH you need.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
MTC2 R7
Universal winding testers 6, 12, 15, 30, 40, and 50 kV
MTC2 winding test systems are highly compact, fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
For repair, maintenance, and service
Surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between each other
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Wired decoupling
ohmic resistance
-
- winding
- temperature sensor
insulation resistance
High voltage AC optional
test connections
-
- Standard: 4
- Optional: 7 and more
View product
Motor terminal plug
SCHLEICH motor terminal plug test adapters for a wide variety of contacts and requirements.
Motor contact suitable for electric motor
- 3-pole motor terminal plug various terminal board sizesandbolt diameters
- 6-pin motor terminal plug various terminal board sizesandbolt diameters
- 9-pin motor terminal plug various terminal board sizesandbolt diameters
- motor terminal plug one or two protruding Grounding spikes contacting the mounting screw
- motor terminal plug two-wire technologyand four-wire technology
- Test plug forluster terminals
- Kelvin terminalscan be configured as a block as desired
- Kelvin clamps loose
- Customized special solutions
- Fully automatic contacting
- and more
All test plugs/test terminals are developed by us in Hemer, mechanically manufactured, and, upon request, also completely electrically wired.
The testing system, including testing mechanics and testing plugs, is often supplied as a complete turnkey solution. This guaranteesa single point of contact for all tasks.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
Motor terminal plug
Test plug for contacting motor terminal boards
- motor terminal plug
- Quick connection for 6, 8, or 9 bolts
- For different motor terminal board sizes
- For threaded bolts M4, M5, M6, M8, and M10
- Without, with 1 or 2 motor housing contacts
- Super easy cable connection
- Several patents pending
View product
Electrical specification
SCHLEICH testing systems forintermediate and final inspection ofelectric motorsfor the entire motor production process.
From Test entire motor to winding tests, you receive all safety and quality testing methods from a single source.
testing methods
- winding resistors
- Winding inductors
- Capacitance
- protective conductor resistance
- insulation resistance
- insulation resistance
- High voltage AC
- High voltage AC warm
- Leakage current
- High voltage DC
- High voltage DC warm
- Electrical function and data
- cos ϕ
- Active, apparent, and reactive power
- Short-circuit current testUk
- Idle and load operation
- heating test
- Endurance run with load profile
- Inspection of all components such as:
- brake
- heating
- temperature sensor
- Encoders, resolvers, transducers of all kinds...
- Offset angle adjustment of the encoder
- Reading and writing the electronic nameplate
- Including complete mechanical test setup and adaptation
- end of life
- and more
From simple idle test benches to complex load test benches including all attachments, SCHLEICH is at SCHLEICH side.
Many manufacturers of standard and special motors worldwide rely on our testing technology.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
Winding test of the stator or rotor
- Surge test
- Partial discharge during surge test
- insulation resistance
- High voltage
- Partial discharge at high voltage AC
- Resistance
- inductance
- rotating field
- and more
SCHLEICH pioneering winding testing for over 35 years. Countless innovations set our company apart.
This is proven by the thousands of winding testers used by enthusiastic customers worldwide.
From laboratory testing equipment for research and development to fully automated testing systems, you can obtain everything from a single source.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
MTC3
High-end testing systems for engine production – without limits
MTC3 winding test systems are fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
- Testing of stators, rotors, transformers, and chokes
- surge test 15 kV
- Fully integrated partial discharge testing in accordance with IEC 61934 and DIN EN 60034-18-41
- Resistance measurement using four-wire technology temperature compensation
- Insulation resistance test with automatic PI measurement
- Inductance testing | LCR inductance measuring bridge
- high voltage test according to VDE standard
- Partial discharge at high voltage AC
- insulation test
- Precise four-wire with temperature compensation down to thespace
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
View product
MTC2 R7
Universal winding testers 6, 12, 15, 30, 40, and 50 kV
MTC2 winding test systems are highly compact, fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
For repair, maintenance, and service
Surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between each other
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Wired decoupling
ohmic resistance
-
- winding
- temperature sensor
insulation resistance
High voltage AC optional
test connections
-
- Standard: 4
- Optional: 7 and more
View product
Winding, body, phase-to-phase fault
SCHLEICH testing systems forall production stepsofelectrical machines.
From copper Test and professional winding testing to complete Motor
All testing methods for quality and safety testing are available.
Checking the winding
- surge test 50 kV
- Partial discharge during the surge test
- High voltage AC
- Partial discharge at high voltage
- Leakage current
- High voltage DC
- insulation resistance
- DAR – Dielectric Absorption Ratio
- PI – Polarization Index
- and more
From laboratory testing equipment for research and development to fully automated testing systems, you can obtain everything from a single source.
SCHLEICH pioneering winding testing for over 35 years. Countless innovations set our company apart.
This is proven by the thousands of winding testers used by enthusiastic customers worldwide.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP1-g
protective earth conductor, insulation, high voltage, and functional testing device
The world's smallest safety testing device!
- Protective conductor testers
- Insulation testers
- High-voltage test equipment AC/DC
- Safety & functional testing devices
- 50+ device variants – combining up to 9 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- desktop device 19″ rack mounting
- ½ 19″ or 19″ format
View product
MTC3
High-end testing systems for engine production – without limits
MTC3 winding test systems are fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
- Testing of stators, rotors, transformers, and chokes
- surge test 15 kV
- Fully integrated partial discharge testing in accordance with IEC 61934 and DIN EN 60034-18-41
- Resistance measurement using four-wire technology temperature compensation
- Insulation resistance test with automatic PI measurement
- Inductance testing | LCR inductance measuring bridge
- high voltage test according to VDE standard
- Partial discharge at high voltage AC
- insulation test
- Precise four-wire with temperature compensation down to thespace
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
View product
MTC2 R7
Universal winding testers 6, 12, 15, 30, 40, and 50 kV
MTC2 winding test systems are highly compact, fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
For repair, maintenance, and service
Surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between each other
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Wired decoupling
ohmic resistance
-
- winding
- temperature sensor
insulation resistance
High voltage AC optional
test connections
-
- Standard: 4
- Optional: 7 and more
View product
Cable, supply line
SCHLEICH testing systems forall production stepsofelectrical machines.
All test methods for quality and safety testing are available.
Checking the supply line
- protective conductor resistance consideration of Length of leads cross-section
- reverse polarity
- ohmic resistance
- High voltage AC
- Leakage current
- High voltage DC
- insulation resistance
- DAR – Dielectric Absorption Ratio
- and more
From laboratory testing equipment for research and development to fully automated testing systems, you can obtain everything from a single source.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP1-g
protective earth conductor, insulation, high voltage, and functional testing device
The world's smallest safety testing device!
- Protective conductor testers
- Insulation testers
- High-voltage test equipment AC/DC
- Safety & functional testing devices
- 50+ device variants – combining up to 9 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- desktop device 19″ rack mounting
- ½ 19″ or 19″ format
View product
GLP2-BASIC
protective earth conductor, insulation, high voltage, leakage current, resistance, and function tester
- Insulation testers
- High-voltage test equipment AC/DC
- All-in-one testers
- Safety & functional testing devices
- Approximately 40 device variants – combining up to 21 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
- desktop device 19″ rack mounting
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
Type plate, traceability
SCHLEICH testing systems forall production stepsofelectrical machines.
All options for clear labeling are available.
Traceability solutions
- label printing
- laser printing
- Marking with special dot matrix printing
- RFID tagging
- electronic nameplate
- 1- or 2D barcode
- Reading and writing an electronic type label
- and more
MES data exchange (Manufacturing Execution System) or international networking and data exchange with, for example, SAP®.
We place particular emphasis on reliable traceability.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
brake
SCHLEICH testing systems forall production stepsofelectrical machines.
All options for controlling and testing attachments are available.
Inspection of brakes, clutch, heating
- Automatic variable brake voltage supply AC/DC
- Break in the brakes
- Automatic holding torquemeasurement
- Determine holding torque with torque wrench
- Automatic dynamic braking torque measurement
- Automatic variable heating supply
- and more
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
We place particular emphasis on reliable traceability.
All core competencies lie with SCHLEICH.
Our testing systems are not simply created by combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
Encoder - Angle adjustment
SCHLEICH testing systems forintermediate and final inspection ofelectric motorsfor the entire motor production process.
From Test entire motor to testing the windings, you receive all safety and quality testing methods from a single source.
testing methods
- Resolver test including resolver supply
- Resolver angle adjustment
- Encoder test including encoder power supply
- Encoder angle adjustment – zero track/Z pulse
- Absolute encoder test including encoder supply
- Hiperface
- Hiperface DSL
- EnDat
- SSi
- BiSS
- Single and multi-turn encoders
- Storing the angle offset in the encoder
- Storage of various other information in the encoder
- BEMF measurement
- ke measurement and normalization to V/1000 RPM or V/Hz
- end of life
- and more
From simple idle test benches to complex load test benches, including all attachments, SCHLEICH is at SCHLEICH side.
Many manufacturers of standard and special motors worldwide rely on our testing technology.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
All core competencies lie with SCHLEICH.
Test systems arenot createdby simply combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
Encoder Analyzer
Rotor position sensor Test adjustment
CHECK YOUR MOTORHEALTH!
Troubleshooting and angle adjustment on encoders, resolvers, absolute encoders, etc.
What is the cause of the problem?
The EncoderAnalyzer assists in troubleshooting and analyzing why a Motor an encoder is not running.
For electrical machine manufacturers
For electric motor repair
For maintenance, servicing, and repair
Detailed automatic encoder signal analysis
-
- resolver
- Magnetic encoders
- Optical encoders
- incremental encoder
- SinCos encoder
- Absolute encoder (single-turn and multi-turn)
- Communication via Hiperface, EnDat, SSI, BiSS, etc.
Misangle measurement of rotor and encoder angles on synchronous motors
-
- Support for manual angle adjustment
- Setting the sensor zero point
- Writing the angle offset to the encoder
synchronous motor test
-
- Measurement of the BEMF
- Determination of the ke value during coasting
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP3-M
Electric motor testing – EOL, series, and laboratory
For production, EOL, and automation
For testing laboratories
Test benches for functional and safety testing of all types of engines.
- asynchronous motors
- synchronous motors
- linear motors
- stepper motors
- BLDC
- DC motors
- …
- Engine components
– Brake
– Temperature sensor
– Humidity sensors
– Auxiliary heater
– Fan
– Centrifugal switch
– Rotor position sensor, encoder, resolver, multiturn encoder ...
– Electronic nameplate
View product
