Wind energy – the natural resource
SCHLEICH testing systems forall production steps.
Naturally, this also applies to R&D and laboratory applications.
Winding test of stator rotor
- Surge test
- partial discharge
- insulation resistance
- High voltage
- winding resistance
- inductance
- Capacitance
- rotating field
- and more
generator test
- end of life
- idle
- burden
- Torque/speed
- Power
- losses
- efficiency
- and more
core competencies
SCHLEICH testing systems forall production steps, laboratories, and R&D.
From copper Test and professional winding testing to complete generator testing...
All safety and quality testing methods are SCHLEICH you at SCHLEICH .
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
Testing equipment and testing systems
MTC3
High-end testing systems for engine production – without limits
MTC3 winding test systems are fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
- Testing of stators, rotors, transformers, and chokes
- surge test 15 kV
- Fully integrated partial discharge testing in accordance with IEC 61934 and DIN EN 60034-18-41
- Resistance measurement using four-wire technology temperature compensation
- Insulation resistance test with automatic PI measurement
- Inductance testing | LCR inductance measuring bridge
- high voltage test according to VDE standard
- Partial discharge at high voltage AC
- insulation test
- Precise four-wire with temperature compensation down to thespace
- Rotating field test with static probe
- Expansion to up to 150 connections
- Temperature sensor test for 1, 2, 3 … x sensors
View product
Voltage Analyzer
Precise surge test on the winding
For production and testing laboratories.
- Direct voltage measurement on device under test no line-related influences
- 3-channel precision high-frequency probe
- Super fast measurement
- High measurement resolution
- Plus partial discharge measurement with passive or active antenna
- Integrated measuring point switching
- Ideal for demanding tests
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP2-BASIC
protective earth conductor, insulation, high voltage, leakage current, resistance, and function tester
- Insulation testers
- High-voltage test equipment AC/DC
- All-in-one testers
- Safety & functional testing devices
- Approximately 40 device variants – combining up to 21 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
- desktop device 19″ rack mounting
View product
GLP1-g
protective earth conductor, insulation, high voltage, and functional testing device
The world's smallest safety testing device!
- Protective conductor testers
- Insulation testers
- High-voltage test equipment AC/DC
- Safety & functional testing devices
- 50+ device variants – combining up to 9 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- desktop device 19″ rack mounting
- ½ 19″ or 19″ format
View product
HandHeld
protective earth conductor and insulation resistance tester
- Protective conductor resistance test up to 10 A AC
- Insulation resistance test up to 1,000 V
- Mobile – Lightweight – Indoor/Outdoor
- Transport case – carrying strap
- computer software
- attractive acquisition costs …
- hospital service
- Rotor blade lightning protection testing on wind turbines ...
View product
MTC2 R7
Universal winding testers 6, 12, 15, 30, 40, and 50 kV
MTC2 winding test systems are highly compact, fully automatic, high-end testing devices for a wide variety of wound products in development, production, and testing laboratories.
For production, EOL, automation
For testing laboratories, R&D, approval, certification testing
For repair, maintenance, and service
Surge test
-
- Ultra-fast 50 measurements per second
- Phase comparison between each other
- Patented peak-to-peak measurement
Partial discharge compliant with DIN EN 60034-18:2014
-
- Passive or active antenna
- Wired decoupling
ohmic resistance
-
- winding
- temperature sensor
insulation resistance
High voltage AC optional
test connections
-
- Standard: 4
- Optional: 7 and more
View product
Charging station, charging point, wallbox...
SCHLEICH testing systems for a wide variety ofcharging columns, charging stations, and charging boxes forpublic and private space.
Choose from a variety of test methods for safety and quality testing.
Charging system test
- insulation resistance the individual cables
- High voltage resistance between individual cables
- PE examination
- Safety functions such as interlock
- Electrical function
- Complete electronics function test – phase monitoring
- PWM Communication → PWM Signal Analysis
- FI test (current/time)
- Shutdown test → Safety test according to EN/UL
- Key operation
- Display test with camera
- Testing the billing system
- Testing the printer system
- Checking the lighting, etc.
- Customized special solutions
- Fully automatic switching matrix between the individual lines
- Fully automatic test sequence just a few seconds/minutes
- Flashing controller software
- Interfaces WiFi server
- weights and measures
- Load simulation
- Fully automatic labeling via label and/or laser
- end of life
- and more
|
 AMEDIO charging station, ©Mennekes |
SCHLEICH you in the automatic testing of charging stations in a wide variety of variants.
 |
 |
 |
| AMTRON Professional, ©Mennekes |
AMTRON Premium, ©Mennekes |
AMTRON Compact, ©Mennekes |
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
core competencies
SCHLEICH testing systems forall production steps, laboratories, and R&D.
Our testing systems are not created by simply combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
SCHLEICH for 100% expertise and reliability—in both products and service.
Testing equipment and testing systems
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP2Technology Package
GLP2 meets Windows11®
- Technology Package even greater ergonomics
- Expansion for GLP2-BASIC
- External Windows11® PC
- Even more comfort and intuition
- Optimized visualization
- Even faster input...
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
charging cable
SCHLEICH testing systems for all charging cable variants available on the market.
Choose from a variety of test methods for safety, functionality, and quality testing.
examinations
- insulation resistance
- High voltage resistance AC/DC
- continuity line resistance
- PE examination
- Safety functions such as interlock
- Reverse polarity of cables
- With integrated charging electronics:
- PWM communication
- FI test
- shutdown test
- complete electronics function test
- PE examination
- Customized special solutions
- Fully automatic switching matrix between the individual lines
- connector
- end of life
- and more
SCHLEICH extensive experience in Test automatic Test charging cables in a wide variety of designs with diverse connectors.
In addition to reliable testing technology and MES (Manufacturing Execution System) data exchange, the international networking of testing and database systems, such as withSAP®, is also becoming increasingly important.
core competencies
Our testing systems are not created by simplycombining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
Testing equipment and testing systems
GLP1-g
protective earth conductor, insulation, high voltage, and functional testing device
The world's smallest safety testing device!
- Protective conductor testers
- Insulation testers
- High-voltage test equipment AC/DC
- Safety & functional testing devices
- 50+ device variants – combining up to 9 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- desktop device 19″ rack mounting
- ½ 19″ or 19″ format
View product
GLP2-BASIC
protective earth conductor, insulation, high voltage, leakage current, resistance, and function tester
- Insulation testers
- High-voltage test equipment AC/DC
- All-in-one testers
- Safety & functional testing devices
- Approximately 40 device variants – combining up to 21 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
- desktop device 19″ rack mounting
View product
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP2Technology Package
GLP2 meets Windows11®
- Technology Package even greater ergonomics
- Expansion for GLP2-BASIC
- External Windows11® PC
- Even more comfort and intuition
- Optimized visualization
- Even faster input...
View product
Electric vehicles, e-mobility, automotive, hybrid
SCHLEICH testing systems forall production steps.
Winding test of stator Motor
- Surge test
- partial discharge
- insulation resistance
- High voltage
- winding resistance
- inductance
- Capacitance
- rotating field
- and more
engine test
- safety
- Function
- Encoder testing and calibration
- Idle and load operation
- Torque/speed
- sense of rotation
- vibration
- tightness
- endurance run
- heating test
- end of life
- and more
inverter test
- Function and safety
- Test under extreme conditions
- peak currents
- shutdowns
- Forward and reverse driving
- PWM
- losses
- Communication with the vehicle
- energy flow reversal
- tightness
- end of life
- and more
Cell testing
- insulation resistance the cells and the battery housing or mounting frame
- cell voltage
- cell internal resistance
- safety features
- connector
- tightness
- screw connections
- and more
SCHLEICH pioneering work in the field of winding and motor testing for over 35 years. Our company is characterized by numerous innovations.
This is proven by the tens of thousands of testing devices used by enthusiastic customers worldwide.
From laboratory testing equipment for R&D to fully automated testing systems, you get everything from a single source.
All core competencies lie with SCHLEICH.
Our testing systems are not created by simply combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
SCHLEICH named one of the TOP 100 innovators SCHLEICH the fifth time!
There's no question that your company is one of Germany's leading companies ...
– DUB, Handelsblatt, WirtschaftsWoche
Testing equipment and testing systems
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP2Technology Package
GLP2 meets Windows11®
- Technology Package even greater ergonomics
- Expansion for GLP2-BASIC
- External Windows11® PC
- Even more comfort and intuition
- Optimized visualization
- Even faster input...
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
Photovoltaics – the natural resource
SCHLEICH testing systems for all production steps.
Naturally, this also applies to R&D and laboratory applications.
core competencies
Our testing systems are not created by simply combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
Testing equipment and testing systems
GLP1-g
protective earth conductor, insulation, high voltage, and functional testing device
The world's smallest safety testing device!
- Protective conductor testers
- Insulation testers
- High-voltage test equipment AC/DC
- Safety & functional testing devices
- 50+ device variants – combining up to 9 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- desktop device 19″ rack mounting
- ½ 19″ or 19″ format
View product
GLP2-BASIC
protective earth conductor, insulation, high voltage, leakage current, resistance, and function tester
- Insulation testers
- High-voltage test equipment AC/DC
- All-in-one testers
- Safety & functional testing devices
- Approximately 40 device variants – combining up to 21 test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
- desktop device 19″ rack mounting
View product
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP2Technology Package
GLP2 meets Windows11®
- Technology Package even greater ergonomics
- Expansion for GLP2-BASIC
- External Windows11® PC
- Even more comfort and intuition
- Optimized visualization
- Even faster input...
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
energy processing
Energy processing in high-performance stations with distribution to individual charging stations in a charging station park.
Everything must, of course, be tested for electrical safety functionality.
SCHLEICH testing systems for all production steps.
Naturally, this also applies to R&D and laboratory applications.
All core competencies lie with SCHLEICH.
Our testing systems are not created by simply combining purchased individual components.
Every single part is SCHLEICH and is developed and manufactured in Hemer by our specialists.
Testing equipment and testing systems
GLP2-MODULAR
Multifunctional testing device with up to 25 test methods
- "All in one"
- safety testing equipment
- Safety & functional testing devices
- Modular and combinable from over 25 test methods
- Up to 250 test connections
- Switching matrices for all types of test methods
- PL e, SIL 3, two-hand operation type III C, Cat. 4 safety circuit (depending on device variant and degree of hazard)
- network
- protocol and label printing
- Scanner …
- Technology Package even greater ergonomics
View product
GLP2Technology Package
GLP2 meets Windows11®
- Technology Package even greater ergonomics
- Expansion for GLP2-BASIC
- External Windows11® PC
- Even more comfort and intuition
- Optimized visualization
- Even faster input...
View product
GLP3
Class-leading testing technology unlimited
The top class of testing and measurement technology for safety and function test.
- "All in one"
- Safety & functional testing devices
- For complex projects
- For complex automation
- For the highest demands
- Modular and combinable from over 30 test methods
- Up to 350 test connections
- Switch matrices for all types of test methods
- PL e, SIL 3, Cat. 4 safety circuit, two-hand operation, 2-channel safety
- Windows11
- network
- protocol and label printing
- Industry 4.0
- Interfaces for automation such as PROFINET, EtherCAT, TCP/IP, etc.
- Interfaces to MES, ERP, CAQ systems, etc.
View product
