Based on the modular concept of the GLP2-e, this tester allows a highly precise resistance test. In order to have reproducible results, the test is performed in 4-wire configuration. The current that is flowing during the test and the voltage at the test object is measured fast and with high precision. A possible mains hum is eliminated automatically. With the voltage drop and the test current, first the resistance is detected and then compared to the set value (in consideration of the tolerances). Deviations beyond the tolerances lead to NO GO results (not OK).

This testing device is suitable for laboratories, manual production and automatic production lines.

Highlights

Product Description

The tester is ideally suited for series production with and without result documentation. In laboratories, this testing device can be used for type tests and material examinations.

The new generation of the GLP2 comes with an optimized technology and an attractive appearance. A special highlight is the innovative operation via touch screen in combination with a large graphics display. The tester is operated only by touching the symbols on the graphics display. Numbers and letters can be entered, too. In addition, it is, of course, also possible to connect a standard PC-keyboard and/or a barcode scanner.  

The GLP2-e has a test program database for more than 200 test programs and a result database. The results can be stored, transmitted to a PC or printed out. Directly after testing, you can print labels on a thermal transfer printer and attach them to your products. This way you can be sure that the products you bring into the market are tested and safe.

Depending on the configuration and the composition, the type of the tester will be either the extremely compact GLP2-e or, alternatively, the larger GLP2-i. As for the operating features of the tester and the performance of software and interfaces, both types are completely identical.

For communicating with the electronic environment, the tester is equipped with two serial interfaces. It is possible to print or, alternatively, remote-control the tester via a PC with our software NetComXi or PrintCom. A test step generated in NetCom is transmitted to the tester, where it is performed and the result is returned to the PC. NetCom stores the result on the PC. This is the ultimate solution, because you have a test system, which documents and logs all test steps. In addition, it is possible to operate several testers in one network with a central PC. 

Test programs can be transmitted to the testers and the test results can be returned to the PC, where they are stored. The complete data exchange is controlled via our PC software NetComXi. For details, please refer to "NetComXi" or "PrintCom". It is, of course, also possible to remote-control the tester with your own software.

A remote control via Agilent VEE® or LabVIEW® is possible without problems. For LabVIEW® a high-performance driver is available.

	remote control via Agilent VEE®
	remote control via LabVIEW®

Supply
mains voltage	230VAC +-10% | other voltages optionally
frequency	49Hz / 61Hz
fuse	depending on the configuration of the tester

General Information
languages	German, English, Italian
programming	free programming of all parameters
remote control	digital	yes | via 24VDC inputs/outputs
	RS232	2 interfaces
start test	front switch, foot switch
display	graphical display with touch panel
storage of test programs	for up to 256 test programs
result storage	for up to 256 results
dimensions of the GLP2-e	236 * 320 * 178 mm (W*D*H)
weight	depending on the configuration of the device
color of the GLP2-e	side panels RAL7035 / top RAL 7035
operating temperature	10 degrees ... 50 degrees Celsius
storing temperature	-20 degrees ... 60 degrees Celsius
calibration	incl. calibration certificate

Feature	Graphics LCD
	The graphics display allows an optimum overview and a safe and intuitive operation.
Feature	Inputs via Touch Panel
	Only the GLP2-e Resistance offers this unique feature. The device is operated by simply touching the display with the finger. The operation of the GLP-e Resistance is thus extremely simple, fast and save. You can find this type of operation more and more often in public life, e.g. at cash desks or in airport terminals. A protective coating makes sure that the display doesn’t get damaged or soiled by touching it. In addition, it guarantees a reliable functionning.
Feature	automatic storage of the setting values in the tester
	After switching off, in order to avoid operating errors, the device restarts with the parameters of the test performed before switching off.
Feature	adjustment of all parameters via comfortable menu navigation
	The comfortable menus make sure that the operator can adjust all test parameters correctly.
Feature	help keys in the setup menus
	For every setting value, the display has a help key, which activates the detailed help-text display.
Feature	access-safe tester
	The release / the switching on of the high voltage is secured via a key switch.
Feature	access-safe control
	Inputs can be disabled via a password.
Feature	electronic test times
	By making sure that the duration of the test is the same for every tested product, the electronic test times enable constant test results.
Feature	display of test parameters and test results via LCD at the front panel
	The operator can monitor the test via an LCD at the front panel. After a test object has been tested, the result remains visible on the LCD, so that the operator can easily view the test results.
Feature	combination tester
	This device can be equipped with a great variety of test methods using the same tester size. Despite a great variety of test methds, the device remains extremely compact and handy.
Feature	calibration solely via the software
	The complete calibration is performed via the software. It is not necessary to open the device. Thus, there is no danger that the technician touches the high voltage.
Feature	PC software: PrintCom
	This software allows easy reading in of test results, storage in an EXCEL® file and comfortable printing of self-generated test programs.
Feature	PC software: NetCom
	With this software the tester can be remote-controlled completely. All test programs and test results are stored in a central ACCESS® database. Test programs can be transmitted to the tester. The test results can be printed and statistically evaluated in many different ways.
Feature	PC software: NetCom network
	This software allows the complete remote control of up to 32 testers in a network. The network can be generated via RS485 connections. As an alternative, it is possible to operate up to 32 testers in an Ethernet computer network. This way, you can use your standard PC network without extra cabling.

Label Printers The label printer is used in order to print labels automatically after the test. The layout of the label is de.... more

Foot switch The foot switch can be used for starting a test. Depending on the configuration of a tester, the foot switch m.... more

Calibration Resistors High-precision SCHLEICH calibration resistors with high temperature stability and endurance..... more

Kelvin Clamps Kelvin tongs / Kelvin clamps for an optimum contacting in 4-wire configuration. They can be used for measuring.... more

Motor Connection Plugs Motor connection plugs for the fast connection of 6-pole, 9-pole or 12-pole motors in 2-wire or 4-wire configu.... more

Rolling Tables Rolling tables are ideally suited for transporting a tester or a combination of a tester and a test cover with.... more

MotorAnalyzer The MotorAnalyzer for electric motors is the follow-up model for our reliable motor tester MTC1. The outcome i.... more

NetCom Xi NetCom Xi is our answer to modern data management of test programs and test results. NetCom Xi is a Windows® s.... more

PrintCom PrintCom is the easiest and most efficient solution for storing test results and printing test protocols. .... more