Highlights

Product Features

portable and extremely light-weight universal compact tester for safety tests

ideal for service

ideal as hand-baggage on airplanes

small and portable / integrated test socket

easy and comfortable operation

well-readable 7-segment display

start switch at both sides for left-handed and right-handed operation

optical and acoustical error message when exceeding limit values

PE resistance test with 10A AC in 4-wire configuration / evaluation for resistance or voltage drop

insulation resistance test / evaluation for insulation resistance or current

serial interface for printing or remote control

internal test result storage for reading out the measured values at a later point

WINDOWS® software for remote control, for the administration of databases for test programs and test results and for printing-out test protocols with NetCom Xi

OEM application possible / integration into automatic lines / start input

carrying straps / transport case

Models

single device / PE

single device / ISO

combination tester PE + ISO

combination tester PE + ISO + Function

combination tester PE + ISO + HVDC

combination tester PE + ISO + substitute leakage current

combination tester PE + ISO + HVDC + substitute leakage current

Product Description

The main field of application for Handheld testers is the portable application at the location of the customer. For this reason, the test installations are integrated into a robust aluminum enclosure.  Extensive accessories like transport case and shoulder straps facilitate the handling of the device. This compact and light tester is thus well-suited for service abroad.

The test object is connected via a test socket. Via the test probe, the tests can be performed against this socket. As an alternative, the tester can also be connected to the enclosure (PE feeding point) of the test object via a connection cable. In this case, the tests are performed against this PE-point.   

Test Methods

Technical Data

Supply
mains voltage	230VAC +-10%
frequency	49Hz / 61Hz
fuse	2 Amp

 PE test

Output Data
voltage	max. 12V AC
current	min. 10A AC
regulation	auto. constant-current regulation
frequency of the voltage	50Hz / 60Hz  (depending on the mains)

Rmax maximum PE resistance
range	0.01 ... 0.7Ω  (20Ω)  | 0.1V ... 7V
resolution	0.001Ω
accuracy	+- 2% of final value  +- 0.01Ω

General Information
measuring technique	4-wire measurement / Kelvin test method
evaluation	with GO / NO GO evaluation
limit-value evaluation	max. resistance
type of test	test probe against enclosure connection of the test object or via the test socket (not at devices with HVDC)
test probe	test probe in 4-wire configuration
	optional: with integrated start switch
	optional: with integrated LED
error signal	optical and acoustical
test time	adjustable	0 ... 1.5s
	resolution	0.1s
	accuracy	+- 0.1% of setting value +0,05s

Output Data
voltage	100V DC ... 1000V DC
current	max. 5mA DC | measurable max. 1mA
regulation	auto. constant-current regulation
regulation accuracy	+- 10V
setting steps	10V

Rmin minimum IR resistanced
range	0.2 ... 30MΩ
resolution	10KΩ
accuracy	+- 2% of measured value +- 10KΩ

General Information
evaluation	with GO/NO GO evaluation
limit-value evaluation	min. resistance
type of test	test probe against enclosure connection of the test object or via the test socket (not at devices with HVDC)
test probe	like at the PE test
	optional: with integrated start switch
	optional: with integrated LED
error signal	optical and acoustical
test time	adjustable	0 ... 160 s
	resolution	0.1s
	accuracy	+- 0.1% of setting value + 0.05s

Features

Feature	automatic storage of the setting values in the tester
	In order to avoid operating errors, the device always boots with the parameters of the preceding test.
Feature	adjustment of all parameters via comfortable menu navigation
	The comfortable menus make sure that the operator can adjust all test parameters correctly.
Feature	electronic test time
	The electronic test time ensures that the test time remains the same for every tested product, which enables constant test results.
Feature	test probe for ground-continuity test and insulation-resistance test
	The PE and the insulation to the enclosure of the test object are tested with one test probe. For this purpose, the enclosure of the test object is connected to the tester via a ground lead. This allows fast and safe testing.
Feature	electronic PE current regulation
	The electronic constant-current regulation ensures that the PE test current doesn’t fall below the value required by VDE. In addition, the regulation is very fast, which results in short test times.
Feature	electronic IR voltage adjustment
	The electronic constant-current regulation ensures that the IR test voltage doesn’t fall below the value required by VDE. In addition, the regulation is very fast, which results in short test times.
Feature	calibration solely via the software
	The complete calibration is performed via the software. It is not necessary to open the device. Thus, there is no danger that the technician touches the high voltage.
Feature	PC software: PrintCom
	This software allows easy reading in of test results, storage in an EXCEL® file and comfortable printing of self-generated test programs.
Feature	PC software: NetCom
	With this software the tester can be remote-controlled completely. All test programs and test results are stored in a central ACCESS® database. Test programs can be transmitted to the tester. The test results can be printed and statistically evaluated in many different ways.

Applications / Screens

60204 test	PE test
front view	transport case

Safety Barriers Safety barriers serve to prevent access to test areas according to standards. The chains are supposed to preve.... more

Black box According to VDE regulations, testing devices must be regularly submitted to functional tests. This guarantees.... more

Test Probes SCHLEICH offers a great variety of test probes for the PE test and for the insulation resistance test. The tes.... more

GLP1-e 60204 The testing device GLP1-e 60204 serves for checking the electrical safety at machines and devices according to.... more

GLP1-e The GLP1-e L is an extremely compact testing device for testing the electrical safety and function of electron.... more

GLP2-e/i Going future. The introdruction of the testing device GLP2 was revolutionary. On the basis of a modular concep.... more

NetCom Xi NetCom Xi is our answer to modern data management of test programs and test results. NetCom Xi is a Windows® s.... more

PrintCom PrintCom is the easiest and most efficient solution for storing test results and printing test protocols. .... more